Standard fiber dissociator Pulp standard fiber dispenser Paper standard dredging machine
Product use
fiber dissociator is a standard dissociator that dissociates bundle fibers into single fibers by spinning the fiber raw material of pulp in water at high speed. It is used for the modulation of hand-made paper, the determination of water filtration degree and the preparation of test materials for screening. The equipment complies with JIS-P8220, TpPI-T205, ISO-5263 and other standards. The structure is vertical, easy to operate, reliable, the top cover is sealed well, the container is made of ductile transparent material, the mixing process can be seen. This product is according to ISO 5263 “pulp – laboratory wet dissociation” standard design and manufacture, is a paper factory, scientific research institutions, quality control center pulp pulping special standard equipment, through this product to make its interwoven fibers in the water separated from each other, and maximize the fiber original appearance, the nature of the same, in order to ensure that the experiment to obtain reliable data, guide scientific research and production, Efficient and economical use of stock.
Standard fiber dissociator Pulp standard fiber dispenser Paper standard dredging machine
Implementation standard
| ISO 5263 Pulp – Wet Dissociation in the Laboratory QB/T 1462-1992 Wet Dissociation in Pulp Laboratory Pulps – Laboratory wet disintegration – Part 2 Disintegration of mechanical pulps at 20 degree C to JIS P8220-2-2012 TAPPI-T205 |
Technical parameters
1 container diameter: (152±2)mm×H(191±2)mm
2. Slurry concentration: 0.8% or 1.2% or 2.2%
3. Absolute dry pulp: 24g or 60g
4. Size of slurry: 2L or 2.7L
5. Container volume: about 3. 466L
6. Stirring chamber: transparent material stirring chamber, real-time detection of fiber dredging state
7. Separation mode: Manual 105° baroclinic separation, handle with separation and fastening function.
8. Slurry chassis: 06Cr19Ni10 anti-corrosion platform.
9. Inner baffle screw: inner helix structure: 6.5*6.5*51*4
10. Baffle height: (57±1) mm
11. Height under the baffle: (32±1) mm
12. End radius: 3mm
13. Edge radius: 0.4mm
14. Center distance between baffles: (51±1) mm
15. Stirring impeller speed frequency: (48.3±1.65)S-1
16. Stirring speed (standard) : (2898~2994) r/min
17. The diameter of rotation: Phi 90
18. Edge radius: R=0.8mm
19. Inverted radius: R=4.0mm
20. Bottom spacing: (25±2) mm
21. Bottom inverted radius: R=13. 0mmf
22. Dimensions: 450×265×395mm
23. Weight: 42kg
Standard configuration: transparent mixing tank, 2 pieces of dissociating blade, power cord, manual, certificate, etc
所有評論僅代表網友意見，與本站立場無關。