德國ZWICK拉力試驗機(單柱拉力試驗機),可以完成壓縮和循環的測試,以5kN(1125磅)。便攜,節省空間的訪問具有良好的測試空間設計。這種zwicki系列操作簡便,質量控制和測試應用組件。 一般用于測試高分子材料例如橡膠,塑料,皮革,紙張等材料。
單柱拉力試驗機,壓縮和循環的測試,以5kN(1125磅)。便攜,節省空間的訪問具有良好的測試空間設計。這種zwicki系列操作簡便,質量控制和測試應用組件。
作為替代物,鐙骨假體被用于耳、鼻和喉的治療。成型的人造耳蝸直接連接錘骨和內耳,在植入過程中,為了確保功能完整,球接頭僅在規定區域內移動。假體長度僅為5 mm,直徑為0.5 mm,應用Zwicki電子材料試驗機可以測量小的假體,而不會損害試樣。
·Xforce load cells are only available from Zwick Roell. Xforce負荷傳感器采用茲維克羅爾。
·These accuracy load cells are used for all Zwick load frames.這些傳感器用于所有茲維克負載幀。 All Xforce load cells are based on a rotation-symmetric or
axis-symmetric design and are therefore highly insensitive to transverse forces.所有Xforce傳感器是基于一個旋轉對稱或軸對稱的設計,因此非常不敏感的橫向力。
·The internal synchronous data acquisition rate for all channels is 320 kHz.內部同步數據采集速率,用于所有通道為320千赫。
·Smart sensor technology recognizes & calibrates all connected sensors including their defined force limits and environments.智能傳感器技術的認識和校準包括其定義和力量的限制環境中的所有連接的傳感器。
·Depending on the model, the zwicki-Line is available with closed loop controlled test speeds from 0.001 up to 3000mm/min (independant of the load applied to the
specimen).根據該系列zwicki線可從0.001與閉環控制的測試速度為3000毫米/分鐘(應用到標本不受負載)。
·Three models are available - 500 N, (112lbf), 1 kN (224 lbf), 2.5 kN (562 lbf) and 5 kN (1125 lbf). Test heights from 570 mm up to 1370 mm.三種型號可供選擇-500N,(112lbf),1000牛頓(224磅),2.5千牛頓(562磅)和5千牛(1125磅)。測試了從570毫米高度到第1370毫米。
·The zwicki-Line operates with standard PCs and laptops.該zwicki系列運營標準的個人電腦和筆記本電腦。 With the Stand Alone Option it can even be operated without a PC.特殊情況下它甚至可以不經電腦操作。
·The zwick-Line is fully compatible with testXpert ® software.該茲維克系列兼容測試軟件包testXpert ®。




所有評論僅代表網友意見,與本站立場無關。